Cisco CCNA Course – CCNA Training
Unlock your future with our Cisco CCNA Training! Join now for top-notch CCNA certification preparation. Our program, led by certified expert trainers, provides 24*7 lab access for hands-on practice, focusing on practical-oriented content. Gain real-world insights, troubleshoot network issues, and build confidence for a successful career. Enroll today to unlock your networking potential and thrive in the dynamic IT landscape!
- Enrolled Students : 11210
- 4.6 / 5
Why CCNA Course/CCNA Training?
Cisco is the worldwide leader in IT and networking. Cisco has transformed the way people connect, communicate, and collaborate. Cisco products and solutions are deployed in companies from small & medium sizes to large enterprises.
Cisco is the most dominant player in India for network infrastructure, a clear leader in all segments – Ethernet Switch, Routers and WLAN. Hence there is a good scope for Cisco Networking Professionals in India.
CCNA certification demonstrates the skills and knowledge required to install, operate, configure, and verify basic IPv4 and IPv6 networks. The CCNA Course/CCNA Training also gives you a foundation in networking fundamentals, IP services, security fundamentals, automation, and programmability. The CCNA training course and exam give you the foundation to take your career in any direction in the IT Domain.
Who Should Take CCNA Course/CCNA Training?
The CCNA course is ideal for:
- Candidates passionate about achieving Cisco CCNA Certification.
- Students enthusiastic about making a career as a Network Engineer can take the CCNA Course/CCNA Training.
- Working professionals in IT networking can take the CCNA training course to enhance their knowledge and skills.
- Professionals employed in network administration, operations, and management.
- Entry-level network engineer, Network administrator, Network support technician, Network Engineers, Help desk technician.
- Technicians involved in the installation, operation, and verification of Cisco networks.
Pre-Requisites For CCNA Course/CCNA Training
There are no formal pre-requisites for the CCNA Global Certification Exam, but before appearing for the CCNA Course/CCNA Training, candidates should possess the following knowledge:
- Basic Computer literacy
- Basic Internet usage skills
- Basic IP address knowledge
- Basic PC operating system navigation skills
Job Profiles Available Post CCNA Course/CCNA Training
The 200-301 Cisco CCNA Course/CCNA Training program will train and make you competent to achieve the following job titles:
- Network Associate
- Network Administrator
- Network Engineer
- Network Operations Center (NOC) Engineer
- Network Support Engineer
- Entry-level Network Engineer
- Help Desk Technician
- Network Support Technician
Devices To Be Used During The CCNA Course/CCNA Training
During the CCNA Course/CCNA Training, we provide students the opportunity to work on the following devices:
- Router: 2611 XM, 1841, 1905, 2811, and other latest series.
- Switches: 2950, 2960, 3750, 3560, and other latest series.
- Tools to be used: Cisco IOS, Putty, GNS, Cisco Packet Tracer, and EVE-NG.
The above devices will provide candidates with hands-on knowledge and make them confident in operating these tools. Candidates become efficient at setting up, managing, and operating enterprise networks at the entry-level after completing the CCNA Course/CCNA Training.
CCNA Course/CCNA Training – Exam Details
- Certification Name: CCNA – Cisco Certified Network Associate
- Exam Code: 200-301 CCNA
- Exam Duration: 120 minutes
- Available Languages: English, Japanese
- Exam Location: Examination at Pearson Vue Centers
CCNA Course/CCNA Training Learning Outcomes
- Understanding Networking fundamentals, Network access, IP connectivity, IP services
- Learn about Security fundamentals, Automation and Programmability
- Install, Configure, Operate, Administer, Manage, and Troubleshoot basic IPv4 and IPv6 business networks
- Take up the Cisco 200-301 CCNA Certification Exam, and get worldwide recognition
- Start your journey as a Network Administrator, Network Engineer, Network Support Engineer, or Network Associate
- Practical Training and Hands-on Lab Sessions
- Network Fundamentals and Network Components
- Characteristics of Network Components
- Role and Function of Network Components
- Layer 2 and Layer 3 switches, NextGen Firewalls, Intrusion Prevention System
- Access Points, Cisco DNA Center, Wireless LAN Controller
- Endpoints, Servers, Power over Ethernet
- Describe Network Topology Architectures
- Understanding Two-Tier, Three-Tier, Spine-Leaf, WAN, Small Office-Home Office, On-Premise Infra, Cloud Infra Networks
- Describe Physical Interface and Cabling Types (Single Mode Fiber, Copper, Multi-Mode Fiber, etc.)
- Determine Interface and Cable Issues in the Network
- Understanding TCP and UDP
- Configuration and Verification of IPv4 Addressing and Subnetting
- Understanding Private IPv4 Addressing
- Configuration and Verification of IPv6 Addressing and Subnetting
- IPv6 Address Types
- Understanding Wireless Network Principles
- Virtualization Fundamentals (Server Virtualization, Containers, and VRFs)
- Understanding Switching Concepts
- VLANs Configuration and Verification
- Interswitch Connectivity Configuration and Verification
- Layer 2 Discovery Protocols Configuration and Verification
- Layer 2 EtherChannel LACP Configuration and Verification
- Layer 3 EtherChannel LACP Configuration and Verification
- Operations of Rapid PVST+ Spanning Tree Protocol
- Understanding Cisco Wireless Architectures
- Understanding of Cisco Wireless AP Modes
- Describe Physical Infrastructure Connections of WLAN Elements
- Describe AP, WLC, Access/Trunk Ports, LAG
- WLC Management Access Connections
- Basic Understanding of Telnet, SSH, HTTP, HTTPS, Console, and TACACS+/RADIUS
- Basic Wireless LAN GUI Configuration Understanding
- Basic Configuration on a Cisco Router
- Components of the Routing Table
- Router Forwarding Decision-Making Process
- IPv4 and IPv6 Static Routing Configuration and Verification
- Single Area OSPFv2 Configuration and Verification
- First-Hop Redundancy Protocols – Purpose, Functions, and Concepts
- Inside Source NAT Using Static and Pools
- NTP Operating in a Client and Server Mode
- Role of DHCP and DNS within the Network
- Function of SNMP, Use of Syslog
- DHCP Client and Relay Configuration and Verification
- Forwarding Per-Hop Behavior (PHB) for QoS
- Configure Network Devices for Remote Access Using SSH
- Function of TFTP/FTP in the Network
- Major Security Concepts (Threats, Vulnerabilities, Exploits, and Mitigation Techniques)
- Configure and Verify Device Access Control Using Local Passwords
- Understanding IPsec Remote Access and Site-to-Site VPNs
- Access Control Lists Configuration and Verification
- DHCP Snooping Configuration and Verification
- Dynamic ARP Inspection Configuration and Verification
- Port Security Configuration and Verification
- AAA – Authentication, Authorization, and Accounting Concepts
- Basic Understanding of WPA, WPA2, and WPA3
- Importance of Network Automation in Network Management
- Traditional Networks and Controller-Based Networking Comparison
- Understanding Software-Defined Architecture
- Overlay Network, Underlay Network, and Fabric
- Understanding Northbound and Southbound APIs
- Basic Understanding of Device Management with Cisco DNA Center
- Describe Characteristics of REST-Based APIs (CRUD, HTTP Verbs, and Data Encoding)
CCNA Course/CCNA Training Labs Outline
- Cisco Command-Line Interface (CLI)
- Taking console of Router
- IOS Modes on devices
- Use of various show Commands
- Use of copy, write, erase, and delete command
- Configuring various Passwords on devices
- Configuring an IPv4 address on a Router
- Configuring Telnet
- Configuring SSH
- Configuring DHCP
- Configuring DNS
- Configuring HTTP services on a Router
- Backup and Restoration of Configuration
- Performing Password Recovery on a router
- Backup of IOS on a router
- Restoration of IOS on a router
- Configuring Static Routing on two routers
- Configuring Static Host Route on Router
- Configuring Static Routing on three routers
- Changing AD Value of a Static Route
- Configuring Static Default Route on Router
- Configuring Static Discard Route on Router
- Configuring Single Area OSPF
- Verification of OSPF routing table, neighbor table, database table
- Verifying an OSPF process on interfaces in detail
- Changing Hello and Dead Interval on interfaces
- Changing Interface Cost
- Use of ip ospf mtu-ignore command on interface
- Changing OSPF network type
- Changing OSPF Priority on interface
- Shutting down the OSPF process on interface
- Debugging the OSPF adjacency
- Changing reference-bandwidth for cost calculation
- Flooding default route information using default-information
- Defining administrative distance using distance command
- Controlling packet forwarding over multiple paths using maximum-paths
- Using passive-interface command to suppress update information
- Changing router-id for OSPF process using router-id command
- Shutting down the OSPF process by shutdown command
- Configuring Multi-Area OSPF on router using network command
- Using show ip ospf border-routers command to verify ABRs and ASBRs
- Configuring IPv6 Static Routing on two routers using Next Hop IP Address
- Configuring IPv6 Static Host Route on Router
- Configuring IPv6 Static Routing on three routers
- Changing AD Value of an IPv6 Static Route – Path Preference; Static Floating Route
- Configuring IPv6 Static Default Route on Router
- Verifying static routes by show ipv6 route command
- Ping and Traceroute to check reachability
- MAC Address-table verification, adding/clearing entries, changing aging time
- Assign IP on VLAN interface for backup and configuration recovery
- Creating and renaming Access and Voice VLANs on a switch
- Assigning VLAN membership to switchports
- Verifying VLAN information with show vlan brief command
- Configuring access and trunk ports on switches
- Defining trunk encapsulation protocol (Dot1q, ISL, negotiate)
- Verifying trunk ports using show interfaces trunk command
- Changing Native VLAN and allowed VLAN list on trunk ports
- Using DTP for trunking with switchport mode dynamic auto/desirable command
- Turning off trunk negotiation by switchport nonegotiate command
- Configuring Inter-VLAN Routing using Router or Layer 3 Switch
- Verifying Spanning Tree Protocol operation
- Changing Spanning-Tree mode using spanning-tree mode command
- Manipulating Root Bridge election process
- Manipulating Root Port / Designated port election
- Configuring spanning-tree portfast for rapid convergence
- Configuring and verifying Port-Security on switchports
- Performing err-disable recovery of switchports
- Configuring BPDU Guard feature on switches
- Creating and defining permit/deny statements in standard and extended ACLs
- Applying ACLs on router interfaces and verifying reachability
- Editing ACLs using ip access-list standard/extended command
- Blocking services like HTTP, HTTPS, FTP, DNS, DHCP with extended ACL
- Configuring named ACLs on router
- Configuring IPv6 access-list on proper interfaces
- Defining Inside and Outside interface for NAT
- Configuring Static NAT, Dynamic NAT, and Port Address Translation
- Verifying and debugging NAT translations, clearing older translations
- Configuring HSRP, enabling Preempt, changing priority, tracking interface/route
- Configuring and verifying ICMP-based IP SLA, creating track objects
- Configuring CDP and LLDP on Switches, verifying status
- Configuring and verifying NTP server on router
- Enabling SNMP on router
- Using logging host command for Syslog server integration
- Log into the WLC, monitor WLC, configure Dynamic VLAN interface and DHCP scope
- Configure WLAN, RADIUS server, management options, Cisco DNA Center
- Configure and verify NTP, System Message Logging
- Create Cisco IOS image backup and perform IOS upgrade
- Configure WLAN with WPA2 PSK using GUI
- Secure console and remote access, enable/limit remote access connectivity
- Secure device administrative access, configure and verify port security
- Implement device hardening
Prerequisites for CCNA 200-301 Certification
There are no pre-requisites for the CCNA 200-301 Certification. Anyone passionate about building a career in the Networking domain can appear for CCNA 200-301 Certification Exam.
How to schedule the CCNA 200-301 Certification Exam?
- At Test Center: Cisco CCNA certification exam is delivered in a proctored environment at a Pearson VUE Authorized Test Center. To schedule a certification exam or locate a test center, visit https://home.pearsonvue.com/cisco.aspx.
- OnVUE Online Proctored Exam: Get Cisco CCNA certified from your home or office. You can take your Cisco CCNA examination from home through OnVUE online proctoring. A live proctor will monitor you through the webcam on your workstation to provide a secure exam experience.
The same Pearson VUE web account is used to schedule the Cisco CCNA Certification exam at the test center or via OnVUE Online proctored Exam.
CCNA 200-301 Certification Exam consists of following types of questions.
- Multiple choice questions with just one answer
- Multiple choice questions with more than one answer
- Drag & Drop questions
- Fill in the blanks
- Simulation Questions
Duration, No. of Questions, Criteria for Passing
CCNA 200-301 is a single exam, consisting of about 120 questions, to be answered within 120-minutes. You should score around 80 – 85 percentage marks to achieve the CCNA certification.
Cost of 200-301 CCNA Certification
200-301 CCNA Certification fees in India is $300 + Local Taxes. The exam fee is payable in US Dollars
Validity of 200-301 CCNA Certification
200-301 CCNA Certification is valid for 3 years. You must renew your certification before the expiry date.
Process to renew CCNA 200-301 Certification
There are 6 options to renew CCNA 200-301 Certification:
- Pass any one associate exam
- Pass any one professional concentration exam
- Pass one technology core exam
- Pass any one expert-level written exam
- Pass any one expert-level Lab/Practical exam
- Earn 30 CE credits
₹ 15,900
₹ 12,900
This course includes:
- Total Duration : 80 Hrs (2/3 Months)
- Batches : Weekdays/Weekends
- Training Level : Intermediate
- Lab Access: Yes, 24*7
- Training Mode: Classroom & Online
- Language: English, Hindi
- Interview Questions: Yes
- Exam Practice Questions: Yes
- Training Certificate: Yes
- Students Enrolled: 11210
- Placement Assistance: Yes
Events
Say Ahead with Our Upcoming Training
Courses You May Like
Multi-Track Job Guaranteed Training for Network Engineers
₹ 100,000 ₹ 89,000
Cyber Security Engineer Job Guaranteed Training
₹ 120,000 ₹ 109,000
Multi-Vendor Job Guaranteed Training for Network Engineers
₹ 150,000 ₹ 130,000
CCIE Enterprise Infrastructure Certification Training
₹ 110,000 ₹ 99,000
CCIE Security Certification Training
₹ 110,000 ₹ 99,000
Cisco CCNA Certification Training
₹ 15,900 ₹ 12,900
Cisco CCNP Enterprise Certification Training
Cisco CCNP Security Certification Training
Cisco SD-WAN Solutions (ENSDWI) Training
₹ 21,900 ₹ 17,900
Cisco SDA Training (SD Access) Training
₹ 19,900 ₹ 15,900
Palo Alto Firewall PCNSA/PCNSE Training
₹ 21,900 ₹ 17,900
Checkpoint Firewall CCSA/CCSE Training
₹ 21,900 ₹ 17,900
Fortinet Fortigate Firewall Training
₹ 21,900 ₹ 17,900
F5 Load Balancer Certification Training
₹ 27,900 ₹ 21,900
AWS Solutions Architect – Associate Training
₹ 19,900 ₹ 15,900
Certified Ethical Hacker Certification Training
₹ 59,000 ₹ 44,900
Cisco Devnet Associate Certification Training
₹ 21,900 ₹ 17,900
Redhat Ansible Network Automation Training
₹ 34,900 ₹ 24,900
Cisco Identity Services Engine (ISE) Training
₹ 19,900 ₹ 15,900
AWS Advanced Networking Specialty Training
₹ 34,900 ₹ 24,900
Baldev Singh
CCIE Sec # 37094, PCNSE, CCSE, MCSE
15+ Years of Experience
With over 15 years of experience and a wealth of certifications including CCIE Sec, PCNSE, and more, Baldev brings deep expertise in network security to our team.
Saurabh Yadav
Triple CCIE EI, Security, SP # 46962
15+ Years of Experience
A Triple CCIE with over 15 years of experience, Saurabh specializes in Cisco, Checkpoint, SD-WAN, and more, having deployed complex enterprise networks for global clients.
Sudhanshu Bhat
CCIE # 41212, AWS, PCNSE, CEH, CEI
12+ Years of Experience
With certifications including CCIE, AWS, and PCNSE, Sudhanshu brings over 12 years of experience in cloud and network technologies to the table.
Surendra Singh
CCIE EI # 60346, SDWAN, ENCOR
10+ Years of Experience
With over 12 years of experience and certifications such as CCNP and CCIE EI, Surendra specializes in SDWAN and enterprise networking solutions.
Register for a Free Demo Session Today
A Great place to learn and grow
At I-Medita, we’re your launchpad for growth – a place where learning transforms into success.
Celebrating the Journey from training to Career
Hear from Our Placed students!
Multitrack Program >> L&T
Vinay Ranjan
Vinay embarked on his journey with I-MEDITA, enrolling in the Multi-Track (JGP) Training program. This comprehensive program covered various courses, including CCNA200-301, CCNP ENARSI, CCNP ENCOR, Firewall training,..
Multitrack Program >> TCL
Shalini Chaudhari
Shalini also praises the extensive practice and interview questions provided during the training, which played a crucial role in her preparation for the real-world challenges she faced during job interviews...
Multitrack Program >> Infosys
Vikas Mulik
Vikas Mulik shares his experience of enrolling in the CCIE Security training with I-Medita. He talks about how the training helped him gain the knowledge and skills needed to secure a job as a Network Security Expert with Infosys...
Multitrack Program >> Wipro
Prerna Ramraje
Prerna dives into her experience with I-MEDITA's comprehensive Job Guarantee Program, highlighting how the institute's top-notch training quality, innovative teaching methods, and hands-on practice sessions played a pivotal role...
Multitrack Program >> CompuCom
Sudhanshu Wasu
Sudhanshu's dedication and hard work paid off as he secured a job change with an amazing 200% salary hike after completing the Multi Track training. In this video, he highlights the key factors that contributed to his success,..
Multitrack Program >> SecurView
Kaustubh Malunjkar
Kaustubh Malunjkar talks about his experience at I-MEDITA and how the training program helped him not only acquire the necessary technical skills but also the confidence to tackle the challenges of the industry...
Multitrack Program >> Wipro Limited
Manisha Pandey
Manisha's journey began with a passion for technology and a desire to carve out a successful career in IT networking. Armed with determination and ambition, she embarked on her journey by enrolling in I-MEDITA's training programs,..
Multitrack Program >> Hitachi
Niraj Barbhaya
Niraj's journey is a testament to the power of comprehensive training and determination. He completed a range of training courses at I-MEDITA, including CCNA, CCNP, Firewalls, AWS, and Personality Development.Through his engaging narrative,..
Multitrack Program >> TCL
Pravin Khobragade
Pravin commends the high-quality training provided by I-MEDITA, emphasizing the depth of knowledge and expertise demonstrated by our instructors. He highlights how our training program equips students with the practical skills...
Authorized Vendor & Certification Parteners
